Methods to sew on badges by hand or by machine

If you want to liven up an outfit, accessory, luggage piece or perhaps hats you can sew on badges to obtain the new look easily. Badges or patches when placed strategically can immediately affect the look of a garment or accessory and take it from boring to spunky in just a few minutes. If you’ve got children and they keep earning badges of merit www.dogbadge.com you would like to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy when you know the way to do it.

To do this approach to sewing on a badge, start with placing the badge to the place for which you want it to be. Now secure the badge well with a few pins so that it stays in place and doesn’t shift while you’re sewing it on. So if you happen to be putting the patch on a garment, you have to fix the patch after which you can try the garment on to make certain that the patch or the badge looks suitable in the place. If your patch requires a little readjustment you can accomplish it at this time easily.

Now thread the needle ensuring that the thread that you’re using isn’t too long. Maintain the thread at a length of approximately 18inches for easy maneuvering. If your thread is too long then you might get bothered by knots. Once you have the thread ready make a knot at the end of the thread. You could thread a needle by hand by holding the non knotted end between your forefinger and thumb and then passing it in the eye of the needle. It’s also possible to get the assistance of a needle threader if you find threading a needle like this difficult.

Pass the needle in the badge and also the fabric being sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you started stitching keeping this distance from the last stitch at all times. Continue stitching surrounding the entire perimeter of the badge until you have completely finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by using a single stitch. Pull the thread strongly to secure the knot after which cut-off any excess thread which is left. Lastly take off extra safety pins that you were using to secure the patch in position.

You may as well sew on badges with the aid of a sewing machine in case you don’t wish to do the same yourself. Select a thread that matched the colour of the patch after which you can tread your machine. You could also pick a contrasting color with regards to the look which you want to present your badge. Once this is successfully done you need to start sewing you badge. Take advantage of the surface of the badge as your kick off point and sew all across the edge of your badge making use of the regular stitch mode ending at your starting point. Once done, cut any additional thread that connects the badge to the machine and your garment is ready to be used with the badge.